DIY Home Theatre Speakers

Back in September 2007 Adam constructed a pair of 3-Way DIY Tower Loudspeaker using all HiVi Research drivers. Well, as most of us in this hobby know - once you start building, you just can't stop! The photo below shows Adam's HT setup up in 2007 sporting his new DIY tower loudspeakers.


And here is a more recent photo of his HT setup.


In the photo are a couple of new projects. A DIY HiVi SP10 10" subwoofer and a DIY HiVi home theatre center channel. Consistent with his previous tower loudspeaker build, only drivers from HiVi Research were used and all of the speaker enclosures are constructed using MDF with a black oil based epoxy paint finish and red oak trim.

Adam reports excellent results and seamless integration with his HT setup. His only complaint is that he needs matching rear channels now. I am sure it will only be a matter of time before we see those. See the project pages for full information about these home theater loudspeakers:

• DIY 3-Way (HiVi F8 / F5 / SD1.1A) Tower Loudspeakers
• DIY 2-Way (HiVi F5 / SD1.1A) Center Channel Speaker
• DIY (HiVi SP10) 10" Subwoofer Project

What's Playing: A Flock of Seagulls - Telecommunication